Design Part includes settings about what information should be passed from the Revit part to the design file. The settings control if, and how, to pull over the concrete extents and reinforcing information.

Open

Concrete Extents

Concrete extents can either be included in the target design file or not. If they are included, Eriksson Sync will replace the entire contents of the concrete extents tab in the Eriksson Software design application with information from the Revit model. This includes the exact geometry, as modeled, and cross section information (which is provided by the family map).

The solid zone inclusion option is for insulated wall panels. It dictates which solid zones are to be included in the design file. The options are to include all solid zones, only endblocks, or no solid zones.

Reinforcement

Each type of reinforcement is given the option to be included in the target design file or not. When a type of reinforcement is included it will replace that same type in an existing design file. For example, if strand is included it will replace all strand in the design file.