Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 12 Next »

v1.9.9 - November 16, 2023

  • Marks Manager expansion to include status of tickets (Reinforced, Detailed, Released)

  • Addition of status to the Flat, Warped and Void Visibility Tools

  • Change to Copy Reinforcement to copy to multiple items

  • Addition of Revit 2023 compatibility

v1.9.10 - November 29, 2023

  • Fix menu items not being available in Design Manager

  • Fix for rounding issues with family maps

  • Fix specialty equipment being shown in Design Manager

v1.9.11 - December 6, 2023

  • Fix Edit Family Map errors with specialty equipment

  • Fix bug with beam family in rotated position in family editor

  • Added Right-Left as possible axis direction which is the negative of Left-Right

  • Fix for distances showing as feet instead of inches in the family map editor

v1.9.12 - January 29, 2024

  • Fix Construct Assembly not bringing in concrete extents for some families

  • Addition to Sheet Browser to adjust column widths

v1.9.13 - February 12, 2024

  • Added warnings to Bulk BOM Host

  • Added Reset function to Bulk BOM Host

  • Fixed Bulk BOM Host efficiency

  • Fixed bug for exporting sloped beams

v1.9.14 - February 19, 2024

  • Refined exporting of sloped beams

  • Changed Assign Marks tool to set mark numbers in order of the control numbers

  • Changed Marks Manager to isolate elements when viewing differences

  • Added Fill Geometric Parameters tool

v1.9.15 - February 22, 2024

  • Added intermediate points for creating sections to handle sloping beams

  • Changed Bulk Update BOM to use subtransactions for setting parameter values

  • Fixed Fill Geometric Parameters to round member area to zero decimals

  • Fixed member weight calculation for Fill Geometric Parameters

v1.9.16 - March, 11, 2024

  • Expand Family Map Wizard in BIMpak

  • Fill Geometric Parameters added square feet calculation settings of Finish Area or Bed Area

  • Fixed Update BOOM tools to read new types of plates and connections

  • In Marks Manager fixed Assign Marks to keep first values of a given mark if they are already started

  • Top In Form tool co-ordinates fixed for Face Flipped family

  • Copy Top In Form tool fixed bug with not setting transform correctly

  • Fixed adding transverse steel

  • Fixed length of transverse steel

  • Fixed Add Connectors tool to find family and type

v1.9.17 - March 13, 2024

  • Fixed error from Join Elements when not selecting elements to join

  • Fixed error from creation of keynotes in Clone Ticket

  • Fixed error in Clone Ticket from leaders without elbows

  • Fixed error with add lifters not finding correct lifter

  • Updated support for built-in strands to handle new naming conventions

  • Fixed support for built-in strands to find correct family and type

  • Added support for solid walls with built-in strand

v1.9.18 - March 19, 2024

  • Changed Construct Assembly to also include Generic Model parts

  • Changed Copy Specialty Equipment to Copy Assembly Parts so it can copy families of any type

  • Change Set Family Parameters to Set Structural Parameters

  • Added Set Nested Family Parameters tool

v1.9.19 - March 22, 2024

  • Fixed lifters with Back orientation

  • Changed Copy Assembly Parts operation upon families inside families

  • Changed Copy Assembly Parts order of checks for validity putting ‘does not contain’ as last

  • Changed Construct Assembly to work on families with families inside of them

  • Changed Construct Assembly to not pull components from inside families to avoid double count

v1.9.20 - March 26, 2024

  • Changed Multi-Void tools to look for selected elements when tool button clicked so user can preselect voids, assemblies and frameworks to be worked on

  • Changed Multi-Void tools to look at preselected elements for voids in assemblies and framework hosts for selected voids

v1.9.21 - April 3, 2024

  • Fixed issue with tools not showing on Revit toolbar

v1.9.22 - May 7, 2024

  • Fixed finding default design program locations

  • Fixed Marks Manager to no longer isolate selected elements

  • Fixed interface of the Warping Tool and added length input boxes

  • Added functionality to Apply Layout to copy sheets, sections views, legends, etc. from other open projects in Revit if not found in the current active project.

v1.9.23 - May 8, 2024

  • Fixed issue with schedules in Apply Layout

  • Fixed issue with setting parameter values

v1.9.24 - May 15, 2024

  • Change to dimensioning in Clone Ticket to adding individual dimensions instead of all at one time

v1.9.25 - May 23, 2024

  • Fix to strand depths in walls with internal strand families

v1.9.26 - May 23, 2024

  • Fix for volume and weight errors in title block

v1.9.27 - May 28, 2024

  • Fix Make Legend From Detail from picking template legends to duplicate

v1.9.28 - June 3, 2024

  • Added third strand row to walls with internal strands

v1.9.29 - June 14, 2024

  • Fixed issue with insulated walls that are missing a wythe in a section due to wall removals/voids

v1.9.30 - June 26, 2024

  • Fixed Compare Marks from picking up elements not part of the pieces

  • No labels