Version History

v1.9.9 - November 16, 2023

• Marks Manager expansion to include status of tickets (Reinforced, Detailed, Released)

• Addition of status to the Flat, Warped and Void Visibility Tools

• Change to Copy Reinforcement to copy to multiple items

• Addition of Revit 2023 compatibility

v1.9.10 - November 29, 2023

• Fix menu items not being available in Design Manager

• Fix for rounding issues with family maps

• Fix specialty equipment being shown in Design Manager

v1.9.11 - December 6, 2023

• Fix Edit Family Map errors with specialty equipment

• Fix bug with beam family in rotated position in family editor

• Added Right-Left as possible axis direction which is the negative of Left-Right

• Fix for distances showing as feet instead of inches in the family map editor

v1.9.12 - January 29, 2024

• Fix Construct Assembly not bringing in concrete extents for some families

• Addition to Sheet Browser to adjust column widths

v1.9.13 - February 12, 2024

• Added warnings to Bulk BOM Host

• Added Reset function to Bulk BOM Host

• Fixed Bulk BOM Host efficiency

• Fixed bug for exporting sloped beams

v1.9.14 - February 19, 2024

• Refined exporting of sloped beams

• Changed Assign Marks tool to set mark numbers in order of the control numbers

• Changed Marks Manager to isolate elements when viewing differences

• Added Fill Geometric Parameters tool

v1.9.15 - February 22, 2024

• Added intermediate points for creating sections to handle sloping beams

• Changed Bulk Update BOM to use subtransactions for setting parameter values

• Fixed Fill Geometric Parameters to round member area to zero decimals

• Fixed member weight calculation for Fill Geometric Parameters

v1.9.16 - March, 11, 2024

• Expand Family Map Wizard in BIMpak

• Fill Geometric Parameters added square feet calculation settings of Finish Area or Bed Area

• Fixed Update BOOM tools to read new types of plates and connections

• In Marks Manager fixed Assign Marks to keep first values of a given mark if they are already started

• Top In Form tool co-ordinates fixed for Face Flipped family

• Copy Top In Form tool fixed bug with not setting transform correctly

• Fixed adding transverse steel

• Fixed length of transverse steel

• Fixed Add Connectors tool to find family and type

v1.9.17 - March 13, 2024

• Fixed error from Join Elements when not selecting elements to join

• Fixed error from creation of keynotes in Clone Ticket

• Fixed error in Clone Ticket from leaders without elbows

• Fixed error with add lifters not finding correct lifter

• Updated support for built-in strands to handle new naming conventions

• Fixed support for built-in strands to find correct family and type

• Added support for solid walls with built-in strand

v1.9.18 - March 19, 2024

• Changed Construct Assembly to also include Generic Model parts

• Changed Copy Specialty Equipment to Copy Assembly Parts so it can copy families of any type

• Change Set Family Parameters to Set Structural Parameters

• Added Set Nested Family Parameters tool

v1.9.19 - March 22, 2024

• Fixed lifters with Back orientation

• Changed Copy Assembly Parts operation upon families inside families

• Changed Copy Assembly Parts order of checks for validity putting ‘does not contain’ as last

• Changed Construct Assembly to work on families with families inside of them

• Changed Construct Assembly to not pull components from inside families to avoid double count

v1.9.20 - March 26, 2024

• Changed Multi-Void tools to look for selected elements when tool button clicked so user can preselect voids, assemblies and frameworks to be worked on

• Changed Multi-Void tools to look at preselected elements for voids in assemblies and framework hosts for selected voids

v1.9.21 - April 3, 2024

• Fixed issue with tools not showing on Revit toolbar

v1.9.22 - May 7, 2024

• Fixed finding default design program locations

• Fixed Marks Manager to no longer isolate selected elements

• Fixed interface of the Warping Tool and added length input boxes

• Added functionality to Apply Layout to copy sheets, sections views, legends, etc. from other open projects in Revit if not found in the current active project.

v1.9.23 - May 8, 2024

• Fixed issue with schedules in Apply Layout

• Fixed issue with setting parameter values

v1.9.24 - May 15, 2024

• Change to dimensioning in Clone Ticket to adding individual dimensions instead of all at one time

v1.9.25 - May 23, 2024

• Fix to strand depths in walls with internal strand families

v1.9.26 - May 23, 2024

• Fix for volume and weight errors in title block

v1.9.27 - May 28, 2024

• Fix Make Legend From Detail from picking template legends to duplicate

v1.9.28 - June 3, 2024

• Added third strand row to walls with internal strands

v1.9.29 - June 14, 2024

• Fixed issue with insulated walls that are missing a wythe in a section due to wall removals/voids

v1.9.30 - June 26, 2024

• Fixed Compare Marks from picking up elements not part of the pieces

v1.9.31 - June 27, 2024

• Added new filter to Compare Marks

v1.9.32 - July 26, 2024

• Added support for long beams

• Fixed bug with lifter ID linking between Wall and Sync

v1.9.33 - August 7, 2024

• Clone Ticket fix for crash from trying to open other documents

v1.9.34 - August 22, 2024

• Handle errors from Construct Assembly

v1.9.35 - August 28, 2024

• Added Structural Connection family type to Verify and Compare Marks

v1.9.36 - August 29, 2024

• Fix Verify Marks filter from previous update

v1.9.37 - August 29, 2024

• Bumped version to deal with install issues

v1.9.38 - August 30, 2024

• Added f3 filter for structural connections

v1.9.39 - September 11, 2024

• Added Check Ticket

v1.9.40 - October 7, 2024

• Fix for pulling lifters from Revit to Wall

v1.9.41 - October 9, 2024

• Fix for lifters with Front orientation

• Fix for side lifters not being placed by ID

• Added message if Sync can’t find a lifter with the ID before using the default lifter

v1.9.42 - October 18, 2024

• Fixes to open new Beam and Wall files

v1.9.43 - October 23, 2024

• Fixed problem with opening files with long beams in Beam

v1.9.44 - October 25, 2024

• Fix for Wall files

v1.9.45 - October 29, 2024

• Fix for top lifters on Walls

v1.9.46 - November 5, 2024

• Fix for error with Design Manager

• Fix for lifter orientation

v1.9.47 - November 8, 2024

• Fix for issue with beam typical sections being slanted

v1.9.48 - November 11, 2024

• Fix for crash from Add Lifters By Geometry

v1.9.49 - November 13, 2024

• Fix for lifter orientations

v1.9.50 - November 20, 2024

• Fix for different lifter orientations

v1.9.51 - November 27, 2024

• Fix for adding lifters to horizontal panels

• Added support in Clone Ticket for dimensions of reference type REFERENCE_TYPE_CUT_EDGE

v1.9.52 - November 27, 2024

• Fix for Clone Ticket for tags

v1.9.53 - December 16, 2024

• Fix to create assembly to add connections that don’t expand

• Changed Fill Geometric Parameters to look for material names containing “PRECAST CONCRETE”

• Fixed Apply Layout to handle schedules without prefix

v1.9.54 - January 15, 2025

• Fix to Clone Ticket to better handle bad detail lines

• Fix to Clone Ticket to use solid data

v1.9.55 - January 21, 2025

• Internal release

v1.9.56 - February 6, 2025

• Fix to detail groups not checking null children

v1.9.57 - February 7, 2025

• Fix to Clone Ticket for finding solids

v1.9.58 - February 12, 2025

• Fix for Clone Ticket to look for Detail Items

• Added settings to change path of BIMpak settings file

v1.9.59 - February 14, 2025

• Added Equipment Marks Manager

v1.9.60 - February 21, 2025

• Added feature to calculate precast concrete volume and architectural precast volume separately

• Added feature to exclude components from construction of assembly

• Added feature to use Mark Number for Sheet Number when cloning

v1.9.61 - March 3, 2025

• Release for customer

v1.9.62 - March 4, 2025

• Update for new Wall files

v1.9.63 - March 5, 2025

• Added feature rename descriptions in Equipment Marks Manager

v1.9.64 - March 12, 2025

• Fixes for export lifters

• Fixes for setting transverse

v1.9.65 - March 19, 2025

• Fixes for reinforcement in columns

v1.9.66 - March 25, 2025

• Fix for Import Lifter not finding correct wall lifters

• Fix for Clone Ticket to find bounding box of equipment for dimensioning

v1.9.70 - April 8, 2025

• Internal release

v1.9.80 - Jun 13, 2025

• Revit 2025 compatibility support

• Corrected issues with volume and weight calculations

• Fixed Mutli-Void Cutting tool to cut insulation in sandwich panels

• Fixed issue with Copy Assembly Parts not copying nested lifters

• Added new tool called “Top In Form (Three Faces)” that allows for the selection of three faces for placing an assembly origin

• Fixed issues with Visibility filters

• Added new tool called “Multi-Piece Void Cutting” that allows cutting multiple voids in multiple pieces just by selecting the pieces

• Fixed Update Selected BOM to grab connections and lifter families that were being missed

• Added ne tool called “Multi-Warping Tool” that allows for selection of any number of corners each with independent height adjustments for more detailed warping

v1.9.81 - Jul 1, 2025

• Fixed Multi-Void Cutting tool to cut any families inside of structural framing elements

• Added Assembly Change Warning

• Added Beam End Text Visibility