Concrete Extents

Concrete extents can either be included in the target design file or not. If they are included, Eriksson Sync will replace the entire contents of the concrete extents tab in the Eriksson Software design application with information from the Tekla Structures' model. This includes the exact geometry, as modeled, and cross section information (which is provided by the profile).

The solid zone inclusion option is for insulated wall panels. It dictates which solid zones are to be included in the design file. In order for this method to work, the element must contain an insulation solid. The options are to include all solid zones, only endblocks, or no solid zones.

Material properties are pulled over as long as the element's material name is in PSI (5000, 6000, etc).

Reinforcement

Each type of reinforcement is given the option to be included in the target design file or not. When a type of reinforcement is included it will replace that same type in an existing design file. For example, if strand is included it will replace all strand in the design file. The reinforcement is placed relative to the bottom left corner of the section in the design file.

The material properties of the reinforcement are not pulled over.