| Excerpt |
|---|
Design part Part includes settings that tell it about what to information should be passed from the Tekla element to the design file. The settings control if, and how, to pull over the concrete extent extents and reinforcing information. |
...
Concrete extents can either be included in the target design file or skippednot. If the they are included, Eriksson Sync will replace the entire contents of the concrete extents tab in the Eriksson Software design application with information from the Tekla Structure’s Structures' model. This includes the exact geometry, as modeled, and cross section information (which is provided by the profile).
The solid zone inclusion option is for insulated wall panels. It dictates which solid zones you want are to be included in the design file. In order for this method to work, the element must contain an insulation solid. The options are to include all solid zones, only endblocks, or no solid zones.
Material properties are pulled over as long as the elements element's material name is in PSI (5000, 6000, etc).
...
Each type of reinforcement is given the option to be included in the target design file or skippednot. If When a piece type of reinforcement is included it will replace that same type of reinforcement that is currently in the model, IE including strand in an existing design file. For example, if strand is included it will replace all strand in the design file, even if the model is blank. The reinforcement is placed relative to the bottom left corner of the section in the design file.
The material properties of the reinforcement is are not pulled over.