...
The Design section of the toolbar allows editing of design file associations.
New is used to create a file using the properties of a selected part and associate the resulting design file with all selected parts. If multiple parts are selected, all must be of the same type, and the properties of the last one will be used to create the file.
Open is used to associate an existing design file with all selected parts. All parts must be of the same type. The design file will not be edited.
Clear is used to remove an association between the selected parts and their corresponding design files. The files will not be deleted or edited.
...
The Tools section of the toolbar gives access to all of Sync’s functions.
Design Parts is used for linking parts to design files and opening the files in the appropriate design software. The Design Part window will be opened so that parts can be selected in the Design Manager and the Design Part window will be updated accordingly.
Reinforce Parts is used for loading reinforcement from design files into the selected parts. The Reinforce Part window will be opened so that parts can be selected in the Design Manager and the Reinforce Part window will be updated accordingly.
Add Lifters is used for reading lifter information from design files and placing lifters into the model. The Add Lifters window will be opened so that parts can be selected in the Design Manager and the Add Lifters window will be updated.
Edit Cross Section is used to edit the cross section properties of selected parts. The Edit Cross Section window will be opened so that parts can be selected in the Design Manager and the Edit Cross Section window will be updated.
Settings opens the Eriksson Sync Settings window which remains open and on top until closed.
Show Control Numbers will show the Control # column in the grid. Depending on the number of parts in the model this process could take some time to pull all control numbers from the model.
...
The Utilities section provides functions for the Design Manager.
Refresh will update the grid with all information from the model and any changes made to design file associations outside of the Design Manager.
Check “Keep Keep window on top” top to force the Design Manager to stay on top of other windows. If not checked it might go behind Tekla Structures when parts are picked in the model.
...