Marks Manager expansion to include status of tickets (Reinforced, Detailed, Released)
Addition of status to the Flat, Warped and Void Visibility Tools
Change to Copy Reinforcement to copy to multiple items
Addition of Revit 2023 compatibility
Fix menu items not being available in Design Manager
Fix for rounding issues with family maps
Fix specialty equipment being shown in Design Manager
Fix Edit Family Map errors with specialty equipment
Fix bug with beam family in rotated position in family editor
Added Right-Left as possible axis direction which is the negative of Left-Right
Fix for distances showing as feet instead of inches in the family map editor
Fix Construct Assembly not bringing in concrete extents for some families
Addition to Sheet Browser to adjust column widths
Added warnings to Bulk BOM Host
Added Reset function to Bulk BOM Host
Fixed Bulk BOM Host efficiency
Fixed bug for exporting sloped beams
Refined exporting of sloped beams
Changed Assign Marks tool to set mark numbers in order of the control numbers
Changed Marks Manager to isolate elements when viewing differences
Added Fill Geometric Parameters tool
Added intermediate points for creating sections to handle sloping beams
Changed Bulk Update BOM to use subtransactions for setting parameter values
Fixed Fill Geometric Parameters to round member area to zero decimals
Fixed member weight calculation for Fill Geometric Parameters
Expand Family Map Wizard in BIMpak
Fill Geometric Parameters added square feet calculation settings of Finish Area or Bed Area
Fixed Update BOOM tools to read new types of plates and connections
In Marks Manager fixed Assign Marks to keep first values of a given mark if they are already started
Top In Form tool co-ordinates fixed for Face Flipped family
Copy Top In Form tool fixed bug with not setting transform correctly
Fixed adding transverse steel
Fixed length of transverse steel
Fixed Add Connectors tool to find family and type
Fixed error from Join Elements when not selecting elements to join
Fixed error from creation of keynotes in Clone Ticket
Fixed error in Clone Ticket from leaders without elbows
Fixed error with add lifters not finding correct lifter
Updated support for built-in strands to handle new naming conventions
Fixed support for built-in strands to find correct family and type
Added support for solid walls with built-in strand
Changed Construct Assembly to also include Generic Model parts
Changed Copy Specialty Equipment to Copy Assembly Parts so it can copy families of any type
Change Set Family Parameters to Set Structural Parameters
Added Set Nested Family Parameters tool
Fixed lifters with Back orientation
Changed Copy Assembly Parts operation upon families inside families
Changed Copy Assembly Parts order of checks for validity putting ‘does not contain’ as last
Changed Construct Assembly to work on families with families inside of them
Changed Construct Assembly to not pull components from inside families to avoid double count
Changed Multi-Void tools to look for selected elements when tool button clicked so user can preselect voids, assemblies and frameworks to be worked on
Changed Multi-Void tools to look at preselected elements for voids in assemblies and framework hosts for selected voids
Fixed issue with tools not showing on Revit toolbar
Fixed finding default design program locations
Fixed Marks Manager to no longer isolate selected elements
Fixed interface of the Warping Tool and added length input boxes
Added functionality to Apply Layout to copy sheets, sections views, legends, etc. from other open projects in Revit if not found in the current active project.
Fixed issue with schedules in Apply Layout
Fixed issue with setting parameter values
Change to dimensioning in Clone Ticket to adding individual dimensions instead of all at one time
Fix to strand depths in walls with internal strand families
Fix for volume and weight errors in title block
Fix Make Legend From Detail from picking template legends to duplicate
Added third strand row to walls with internal strands
Fixed issue with insulated walls that are missing a wythe in a section due to wall removals/voids
Fixed Compare Marks from picking up elements not part of the pieces
Added new filter to Compare Marks
Added support for long beams
Fixed bug with lifter ID linking between Wall and Sync
Clone Ticket fix for crash from trying to open other documents
Handle errors from Construct Assembly
Added Structural Connection family type to Verify and Compare Marks
Fix Verify Marks filter from previous update
Bumped version to deal with install issues
Added f3 filter for structural connections
Added Check Ticket
Fix for pulling lifters from Revit to Wall
Fix for lifters with Front orientation
Fix for side lifters not being placed by ID
Added message if Sync can’t find a lifter with the ID before using the default lifter
Fixes to open new Beam and Wall files
Fixed problem with opening files with long beams in Beam
Fix for Wall files
Fix for top lifters on Walls
Fix for error with Design Manager
Fix for lifter orientation
Fix for issue with beam typical sections being slanted
Fix for crash from Add Lifters By Geometry
Fix for lifter orientations
Fix for different lifter orientations
Fix for adding lifters to horizontal panels
Added support in Clone Ticket for dimensions of reference type REFERENCE_TYPE_CUT_EDGE
Fix for Clone Ticket for tags
Fix to create assembly to add connections that don’t expand
Changed Fill Geometric Parameters to look for material names containing “PRECAST CONCRETE”
Fixed Apply Layout to handle schedules without prefix
Fix to Clone Ticket to better handle bad detail lines
Fix to Clone Ticket to use solid data
Internal release
Fix to detail groups not checking null children
Fix to Clone Ticket for finding solids
Fix for Clone Ticket to look for Detail Items
Added settings to change path of BIMpak settings file
Added Equipment Marks Manager
Added feature to calculate precast concrete volume and architectural precast volume separately
Added feature to exclude components from construction of assembly
Added feature to use Mark Number for Sheet Number when cloning
Release for customer
Update for new Wall files
Added feature rename descriptions in Equipment Marks Manager
Fixes for export lifters
Fixes for setting transverse
Fixes for reinforcement in columns
Fix for Import Lifter not finding correct wall lifters
Fix for Clone Ticket to find bounding box of equipment for dimensioning
Internal release
Revit 2025 compatibility support
Corrected issues with volume and weight calculations
Fixed Mutli-Void Cutting tool to cut insulation in sandwich panels
Fixed issue with Copy Assembly Parts not copying nested lifters
Added new tool called “Top In Form (Three Faces)” that allows for the selection of three faces for placing an assembly origin
Fixed issues with Visibility filters
Added new tool called “Multi-Piece Void Cutting” that allows cutting multiple voids in multiple pieces just by selecting the pieces
Fixed Update Selected BOM to grab connections and lifter families that were being missed
Added ne tool called “Multi-Warping Tool” that allows for selection of any number of corners each with independent height adjustments for more detailed warping