...
The transverse view is a feature of the pile design software that allows users to create a side profile of the designed pile. This view is not to scale and is used to visualize the transverse zones input from the reinforcement input tab. The view will also show top connection embeds if the option to use them is enabled. The first Bar List table row is auto-populated based on the information entered in the reinforcement input tab.
Embedment Callout Text
The embedment callout in the transverse pile view can be customized. User input text will be used in the detail; the text may include variables that will use specific text strings in the callout text.
Callout Variables
Variables can be used with the form “{VARIABLE_HERE}”. These variables will be replaced in the callout with a specific text. The variables currently in the program are listed below:
{DIMENSION} → Adds the current dimensions of the embed in the form of [ 1”⌀ X 1'-1” LONG ] where the diameter and length, 1” and 1'-1” respectively, are replaced with design accurate values.
Bar List Table
The bar list table is a feature of the pile design software that allows users to create a table of all bars included in the current design project. The table can be expanded upon to include all bars and can be edited as necessary. The cells that show purple are editable, while cells not colored are auto-populated based on other factors in the design.
If the bar list table is deemed unnecessary, it can be turned off in the setting panel. To turn off the bar list table, go to the "Options" panel located on the right pane of the software. This will contain all settings, where you can turn off the bar list table feature.
Strand can be auto populated with the “Auto Add Strand” option which will update the row in the Bar List table until the user edits a row. If a row is edited then it will stay as the user input it. Rebar will also be auto populated into this list if “top connection” is not used in the design.
Cross-Sectional View
The cross-sectional view is a feature of the pile design software that allows users to create a cut section of the pile and view the prestressing strand and transverse reinforcement. The prestressing strand is dimensioned to the center of the strand.
...
To add a custom detail, click on the "Add" button located in the center of each custom detail. This will open up a selection window that lets the user select a custom detail of their choice. Currently, there are two four supported details that may be selected from the program, Custom Image and Detensioning, Detensioning, Embed Elevation, and Embed Section.
...
Custom Image Import
The custom image import feature is a feature of the pile design software that allows users to add any image file or a drawing file (.dwg/.dxf) to their project. This image will be drawn directly to the page and can be scaled as needed. The quality of the image may vary depending on the image quality during import. If a drawing file from AutoCAD is imported, the image will be a vector image and will be scalable, having no reduction in image quality. This is because vector images are not made up of pixels like raster images and can be scaled to any size without losing quality.
Preview Your DWG Files
The Preview section provides you with a visual representation of your imported .dwg files. You'll see a clear preview of your drawing in the window. We've made sure that the quality of the image is maintained, allowing you to scale your drawings without any loss in visual clarity.
Customize Your DWG Files
We understand that you may want to make specific adjustments to your imported .dwg files. That's why we've included settings to help you personalize the appearance of your drawings.
DWG Settings
The DWG Settings section empowers you to customize various aspects of your imported .dwg file:
Line Weight: Adjust the thickness of lines in your drawing to match other elements.
Width Multiplier: Change the rendering aspect ratio to allow more of your drawing to be rendered horizontally.
| Info |
|---|
Use this option if you notice your drawing is being cropped width wise. |
3. Height Multiplier: Change the rendering aspect ratio to allow more of your drawing to be rendered vertically.
| Info |
|---|
Use this option if you notice your drawing is being cropped height wise. |
4.Scale Multiplier: Modify the overall scale of your imported .dwg file, making it larger or smaller as needed.
Padding
The Padding section allows you to add padding, or space, between the content of your drawing and the surrounding border. This ensures a clean and visually appealing layout:
Left: Define the space between the left edge of your drawing and the border.
Right: Specify the amount of space on the right side of your drawing.
Top: Adjust the space at the top of your drawing for proper alignment.
Bottom: Set the space at the bottom of your drawing for proper alignment.
Detensioning Detail
The detensioning detail option is a feature of the pile design software that allows users to create a detensioning sequence detail that will be placed onto the piece ticket directly. This sequence can be auto-generated using the “Auto” option or manually selected by clicking on the order of the strand that the detensioning sequence should occur in.
...
Once all strands have been labeled with a sequence number, the detail can be confirmed and placed on the piece ticket. The user can also use the standard undo/redo features to ease the creation of the detensioning sequence, as well as a clear all button in the windows ribbon that will reset the detensioning sequence.
Embed Elevation Detail
The embed elevation allows the user to create a custom drawing that shows the top connection of the pile. This drawing allows for minimal customization such as showing the rebar in the embedments as well as customizing the callout text. A visual preview is displayed on top of the input window to allow for real time updates to the drawing.
Embed Section Detail
The embed section detail is a custom detail that provides a cut-section to show the embements or rebar in the pile. Only the rebar/embedments will be dimensioned in this detail view.
Lifter & Dunnage View
The lifter and dunnage view shows where the program has its lifters and dunnage points set. This view uses relative pile locations as defined in the Table of Properties. Under the title is the design length the program was run with to verify if the lift points will be valid for all relative locations.
...