...

The section information consists of the thicknesses of the top wythe, insulation, and the bottom wythe. The insulation position consists of the widths of the top end block, bottom end block, left holdback, and right holdback.

Columns

...

For columns the width and depth of the rectangular section can be edited.

...

The different types of beams that can be edited in Sync are shown in the tabs along the left side of the Edit Cross Section window.

DT Beams

Inverted Ts

Spandrels

L Beams

Rectangular

related-labelsClick a tab to edit the section information of a particular type of beam.

Double Tee Beams

...

For double tees the stem geometry and flange information can be edited. For stems the thickness, draft, height, and spacing can be edited. For the flange the thickness, and the left and right overhangs can be edited.

Inverted Tee Beams

...

For inverted tees the thickness and height of the stem can be edited. For the ledges, the right and left ledge thickness and width can be edited as well as the draft.

Spandrels

...

For spandrels the ledge thickness, depth, and draft can be edited as well as the stem thickness and overall height.

L Beams

...

For L beams the ledge thickness, depth and draft can be edited as well as the stem thickness and overall height.

Rectangular

...

For rectangular beams the width and depth of the cross section can be edited.