There are seven distinct view where results are displayed:
Main View: The main view displays a limited set of input, along with the reinforcement schedule and several reinforcement views.
...
2. Ratings Summary: This page displays a table showing the controlling rating for each truck and fill depth combination. Note that the controlling rating is determined by selecting the minimum calculated Load Ratings from all cases.
In the Critical Sections Summary, the controlling rating is selected as the lowest utilization rate, calculated as the ratio of demand to capacity.
...
3. Reinforcement Summary: This page shows the reinforcement layout for the design.
...
The text report also indicates if the culvert has passed all design checks. If there are design deficiencies, they will be indicated in three ways:
A ‘Design Deficiencies’ window will appear on the right side of the text report listing the deficiencies. Clicking on any of these deficiencies will automatically navigate you to the corresponding section of the text report.
The corresponding line in the text report will be highlighted red.
The deficient value will be denoted with an asterisks ( * ).
Tip: You can zoom the report by using a combination of the control key and mouse wheel.
...