...
The center focal point in this tool is the grid in the center of the main window. This will show you all the marks in the project and allow you to edit the mark number and control number. Starting from the left of the grid is the mark number. The mark number can be edited manually if desired, more likely this will change many times based on the rules set in settings along with the group tools. The control number is next as we go through the grid from left to right. This can be manually edited or edited by the tools above, however this is not edited by grouping tools. Family Name and Type Name are after the control number and are useful for setting grouping rules and quickly verifying that no errors have occurred in the tools. The last three columns show the state of ticketing of that mark. These values are read from parameters of the families with the names given in the Construct Assembly Marks Manager Settings.
Settings
Inside the settings menu is a tabbed collection of settings that allow for custom rules to be set that will affect the verify/grouping and compare elements tools. The rules in the grids are saved “C:\ProgramData\Eriksson Software\Eriksson Sync” under the project name.
...