...
This tool creates an assembly from the selected structural framing element. In addition, all elements (excluding elements with the "MANUFACTURE_COMPONENT" parameter containing either “CONNECTION”, “ERECTION”, or “CIP”connections which are identified according to the Connections tab in BIMpak Settings ) that are within the bounding box of the element are automatically included in the assembly. The assembly is then renamed to match the control mark of the structural framing element and the ASSEMBLY_MARK_NUMBER, ASSEMBLY_CONTROL_NUMBER, WEIGHT_PER_UNIT, CONSTRUCTION_PRODUCT_HOST and BOM_PRODUCT_HOST Assembly Mark Number, Assembly Control Number, Weight, Component BOM (Sheet) and Component BOM (Project) parameters are updated. If the element is already an assembly, the assembly adds all not currently included elements and reruns the Update Products Host Join Elements tool to set the CONSTRUCTION_PRODUCT_HOST and BOM_PRODUCT_HOST Component BOM (Sheet) and Component BOM (Project) parameters of all included elements. If the tool is run on an existing assembly, the origin and basis will not be altered.
NOTE: The control mark must be a unique name for an assembly to set its name, otherwise the tool will default the name of the assembly to the Revit default assembly name.
Settings
To construct an assembly the following settings are used in the BIMpak Settings window:
...
Connections need to be identified so their component parts can be added to the assembly. Connections are identified by checking for set values for the Component Type parameter using the Connections settings in the BIMpak Settings window:
...